Siemens SINAMICS V90 Application Description
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Control Unit
  5. SINAMICS V90
  6. Application description

Siemens SINAMICS V90 Application Description

Speed control via profinet
Hide thumbs Also See for SINAMICS V90:
Table of Contents

Advertisement

Quick Links

Download this manual
Application description  07/2016
Speed Control with
SINAMICS V90 and S7-300
via PROFINET
SINAMICS V90 PROFINET / STEP 7 (TIA Portal)
https://support.industry.siemens.com/cs/ww/en/view/109743898

Advertisement

Table of Contents
loading

Related Manuals for Siemens SINAMICS V90

Summary of Contents for Siemens SINAMICS V90

  • Page 1 Application description  07/2016 Speed Control with SINAMICS V90 and S7-300 via PROFINET SINAMICS V90 PROFINET / STEP 7 (TIA Portal) https://support.industry.siemens.com/cs/ww/en/view/109743898...

  • Page 2: Warranty And Liability

    Application Examples at any time without prior notice. If there are any deviations between the recommendations provided in these Application Examples and other Siemens publications – e.g. Catalogs – the contents of the other documents have priority. We do not accept any liability for the information contained in this document.

  • Page 3: Table Of Contents

    2.2.2 Used Components ................6 Basics ......................... 7 Basics regarding SINAMICS V90 PN version ........7 Basic parameter configuration regarding SINAMICS V90 PN ..... 7 3.2.1 Configure PROFINET settings via SINAMICS V-ASSISTANT .... 7 3.2.2 Configure ramp-function generator via SINAMICS V- ASSISTANT ..................

  • Page 4: Task

    Overview Introduction Speed control is one of the two basic functions for SINAMICS V90. The other one is position control. PROFINET communication is a new and advanced feature for SINAMICS V90. In this manual, the basic application of speed control with PROFINET communication for SINAMICS V90 will be described in detail.

  • Page 5: Solution

     SINAMICS V90 PN version  BOP operation of SINAMICS V90 Basic knowledge of these topics is assumed. Required knowledge Basic knowledge on TIA Portal is assumed. Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...

  • Page 6: Hardware And Software Components

    109743898_CPU315F speed control V90 PN via Project file for Scenario A PROFINET Scenario A.zip 109743898_CPU315F speed control V90 PN via Project file for Scenario B PROFINET Scenario B.zip Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...

  • Page 7: Basics

    Standard telegram 5 (only with SIMATIC S7-1500(T))  Siemens telegram 102  Siemens telegram 105(only with SIMATIC S7-1500(T)) Siemens telegram 105 is the default telegram for SINAMICS V90 PN. Telegram 1 will be used n this basic application. Basic parameter configuration regarding SINAMICS V90 PN 3.2.1...
  • Page 8 2 for activating the PN communication. r8931 PN IP address of station active r8932 PN default gateway of station active r8933 PN MAC address of station Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...

  • Page 9: Configure Ramp-Function Generator Via Sinamics V-Assistant

    Par. No. Description Set value P1115 Ramp-function generator selection P1120 Ramp-up time 10 s P1121 Ramp-down time 10 s P1130 Initial rounding-off time P1131 Final rounding-off time Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...

  • Page 10: Configure Profinet Settings Via The Tia Portal

    3.2.3 Configure PROFINET settings via the TIA Portal 3.2.3.1 Configure SINAMICS V90 PN The PROFINET settings of SINAMICS V90 PN can be configured in the TIA Portal as follows: 1. Create a new project and switch to project view. 2. Install the V90 PN GSD file.
  • Page 11 5. Select V90 PN from the “other filed drives” of catalog tree on the right side. 6. Double-click the V90 PN node or drag it to the network view: Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0,...
  • Page 12 The PROFINET settings of SIMATIC S7-300 CPU can be configured in the TIA Portal as follows: 1. Double-click the node “Add new device” from the Device tree:  Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...
  • Page 13 Here, you can configure information about the device name, Ethernet address…You can also use the “Online access” node to find the accessible device and make sure the information is consistent: Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0,...
  • Page 14 3.2 Basic parameter configuration regarding SINAMICS V90 PN 3.2.3.3 Connect SINAMICS V90 PN with S7-300 CPU After the configurations of both SINAMICS V90 PN and S7-300 CPU, you need to connect SINAMICS V90 PN to S7-300 CPU in the network view.

  • Page 15: Installation And Startup

    DC24V is used for the control power supply of the drive and the power supply of the PLC. L2 +24V M PE L+ M PE SIMATIC S7-300 CPU 315F-2DP/PN SINAMICS V90 PN U V W PN PN Figure 4-1 Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...

  • Page 16: Startup (Jog From Drive Side)

     Device name  IP address  Telegram 3. Go online to test the PROFINET communication. 4. Download configurations into controller and device if the communication works. Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...

  • Page 17: Operation Of The Application

    In scenario A, we use a “MOVE” instruction for programming and run the motor with watch table: Table 5-1 Action Remarks Open the organization block “Main [OB1]” from the program folder. Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...
  • Page 18 Action Remarks Find the “MOVE” instruction from the Basic instructions. Program as follows: Compile the PLC program and download the program and its configurations into S7-300 CPU. Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...
  • Page 19 5 Operation of the application 5.1 Scenario A Action Remarks Switch to online mode and enable monitor function: Modify M10.0 to 1: Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...
  • Page 20 QW258, and then the motor starts running at QW258: speed 50% of the rated speed. setpoint. Scaling factor: 4000 hex = 100% of the value of drive parameter p2000 Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...

  • Page 21: Scenario B

    The library is integrated in the Startdrive. If you have installed Startdrive then the NOTE library has been installed. https://support.industry.siemens.com/cs/ww/en/view/68034568 You can download the latest library version from SIEMENS product and information pages https://support.industry.siemens.com/cs/ww/en/view/109475044. Follow the instructions of the manual to implement the library. Table 5-2 Input interface of FB285...
  • Page 22 In scenario B, we will use FB285 in the library for programming and run the motor. Table 5-4 Operation with FB285 Action Remarks When you have installed the library, you can find it at the library view as follows: Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...
  • Page 23 Switch to online mode and activate the monitoring function. Modify M10.0 to 1 and then the motor starts running at the speed of 100 rpm. Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...

  • Page 24: Related Literature

    Siemens Ltd., China DF M3-BF GMC No. 18 Siemens Road Jiangning Development Zone Nanjing, 211100 China mailto: mc_gmc_mp_asia.cn@siemens.com History Table 8-1 Version Date Modifications V1.0 07/2016 First version Speed control with SINAMICS V90 and S7-300 via Profinet Entry-ID: 109743898, V1.0, 07/2016...

This manual is also suitable for:

S7-300

Table of Contents