Input Button; Method - Toshiba TLP780U Owner's Manual

Projection on the screen (continued)
Remote control
5-a,5-b
INPUT ON/STANDBY
LASER
AUTO
KEYSTONE SET
L-CLICK R-CLICK
VOLUME/ADJUST
5-b
MENU ENTER EXIT
PIP FREEZE
RESIZE
CALL MUTE
Control panel
(Main unit side)
ON / STANDBY
VOL / ADJ
5-a,5-b 5-b
Select the input source to project.
There are two kinds of methods as follows (5-a and 5-b.)
Select the input source by pressing INPUT
5-a
INPUT
repeatedly.
INPUT
At shipping from factory, "Analog RGB(1)" connected to
COMPUTER IN 1 connector or "Video" connected to VIDEO
Jack can be selected. (You can select "Camera" when
using the model with a document imaging camera.)
The icon and the name of the selected input source appear
on the screen.
Note
• The types of input sources selected when the INPUT button is pressed repeatedly can be
45
set from the menu screen.
5-b
INPUT
Press INPUT and hold for two seconds.
The input source selection menu appears.
INPUT
Select the input source to project with the
selection button (
Regardless of the contents of input source settings on the
menu screen, all the input sources are displayed here to be
selected.
ENTER
Press ENTER
A picture of the selected input source is projected.
ENTER
When a sound signal source is also connected, sound is
developed from the speaker.
CONTENTS
).
/
Continued
30