Full Menu Settings - Default Setting - Toshiba TLP780U Owner's Manual

FULL MENU settings - Default setting

You can set the Input source, projection mode, etc. from FULL MENU [Default setting].
To operate FULL MENU, refer to page
Input source setting COMPUTER IN 1
Analog RGB(1)
: On/Off with ENTER
Y/P /P
: On/Off with (+) or (-) B R
COMPUTER IN 2
Analog RGB(2)
Digital RGB
VIDEO
S-VIDEO
CAMERA
Projection mode Standard
Rear
Ceiling
Rear ceiling
No signal background Logo
Blue background
None
No signal power off Off
5 min.
Power on Manual
Auto
Startup screen On
Off
Reset EXEC. The settings of FULL MENU [Default setting] are returned to the factory default setting
Notes
• It is impossible to exit from the menu if no input source is selected.
• If the check in the check box for the currently selected source is removed, the setting becomes effective the next time the input is changed.
• In the following conditions, the function to detect no signal ("No signal background", "No signal power off") does not act:
1) When "Video mode" is set to other than [Auto] with selection of Video input or S-Video input.
46
2) When "Signal format" is set to other than [Auto] with selection of Y/P
46
• Note that the projector automatically turns on at the restoration from power failure, if "Power on" is set to [Auto] with the power cord being pluged, even
if it is not intended to.
• Even if "Power on" is set to [Auto], the setting of [5 min.] of "No signal power off" is effective.
• Each item can be set at all input sources, but the settings made at one input source are applied to commonness for all input sources.
• The settings made are memorized automatically when the power is turned off by pressing the ON/STANDBY button. If the power cord is un-
plugged or if a power failure occurs while the projector is on, the settings are not memorized.
.
44
SET : COMPUTER IN 1 connector is selectable by INPUT button
SET : Use COMPUTER IN 1 connector as Analog RGB(1) input
SET : Use COMPUTER IN 1 connector as Y/P
SET : COMPUTER IN 2 connector is selectable by INPUT button
SET : Use COMPUTER IN 2 connector as Analog RGB(2) input
SET : Use COMPUTER IN 2 connector as Digital RGB input
SET : Video input is selectable by INPUT button
SET : S-Video input is selectable by INPUT button
SET : Camera input is selectable by INPUT button
SET The projector placement is set to the floor-mounted front projection mode
SET The projector placement is set to the floor-mounted rear projection mode
SET The projector placement is set to the ceiling-mounted front projection mode
SET The projector placement is set to the ceiling-mounted rear projection mode
SET The TOSHIBA logo is displayed when no signal is input
SET A blue color is displayed at full screen when no signal is input
SET Nothing is displayed when no signal is input
SET The projector continues work even if the no signal status continues
SET The power turns off automatically if the no signal status continues for approx. 5 min.
SET The power turns on by pressing the ON/STANDBY button
SET When the power cord is plugged, the power turns on
SET The opening picture is displayed when the power is turned on
SET The opening picture is not displayed when the power is turned on
The relationship between input source and item
Analog RGB(1) Analog RGB(2)
/P input
B R
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Yes (common for all of the inputs)
Yes (common for all of the inputs)
/P input.
B R
CONTENTS
Yes: Adjustable -: Not displayed
Digital RGB Y/P /P Video S-Video Camera
B R
51