Toshiba 625012200G Quick Start Manual page 16

Drop-ceiling mount (without the bottom base)
1. Attach the supplied ceiling hole template sticker to the ceiling.
2. Open a hole along the inner circle of the sticker.
3. Using the 3 circles on the sticker, drill 3 pilot holes into the ceiling. Then hammer the three sup-
plied plastic anchors into the holes.
4. Mount the Network Camera to the ceiling and feed the cables through.
5. Using the three holes on the side of the camera base, insert the three supplied screws into the
corresponding holes and secure them with a screwdriver.
1
Drill hole
Ceiling Hole Template Sticker
16 16
2 3
4
5