Led Indicators - Toshiba CT User Manual

LED Indicators

Each line and feature button has a LED next to it which indicates the status of the line or
feature associated with the button.
Line LEDs light red or green and flash at varying rates to indicate call status (see
Table 3 LED Indicators
Line or [DN] In-Use
(access outside line)
Incoming Call
(while ringing)
Hold (outside line)
Note
If using
hold indication is only at the
station that places the call on
hold.
Hold – Consultation
(during consultation/transfer to another
station)
Hold – Exclusive (outside line)
Hold – Recall
(when held call recalls your idle station)
Hold – Exclusive Recall
Internal Call
(while station ringing)
Busy Station Transfer
(outside call transferred to your busy
station from a designated station or AA)
After disconnecting first call...
Alert Signal
Conference
Strata DK Digital Telephone 5/99
Use
, the
Your Station (Green)
Interval Rates
2 seconds on, 1/8 second
off— 1/8 second ON/OFF
1 second on at 10 pulses/
second—1 second OFF
4 pulses/second for 1/8
second ON/OFF
10 pulses/second
10 pulses/second
1 second at 2 pulses/second,
1 second at 10 pulses/second
1 second at 2 pulses/second,
1 second at 10 pulses/second
Your [PDN] flashes 10 pulses/
second—1 second off
4 pulses/second, 1/8 second
ON/OFF
10 pulses/second
.5 seconds
10 pulses/second
The Grand Tour
LED Indicators
Table 3).
Other Station (Red)
steady
one second ON/OFF
1/2 second ON/OFF
steady
steady
flashes
steady
[SDN] red flashing or
green ringing
3/4 second on, 1/8
second OFF
2 pulses/second
4 seconds
steady
9