Setting The Ipt1020-Sd Headset Transmit Volume; Viewing Ipt1020-Sd Terminal Information - Toshiba DKT User Manual

IPT1020-SD Settings

Setting the IPT1020-SD Headset Transmit Volume

Setting the IPT1020-SD Headset Transmit
Volume
1. Press + + +
2. Press .
3. Press the Feature Buttons to turn the LEDs On/Off for the desired volume
transmission level (see
Table 17 Volume Level Transmitted from Headset Microphone
FB3
ON
ON
ON
ON
OFF
OFF
OFF
OFF
4. Press FB4 for handset voice output in speakerphone mode (LED On = with, LED
Off = without).
5. Press
6. Go off-hook and hang up.

Viewing IPT1020-SD Terminal Information

1. Press + + +
2. Press , then press
3. Press
only).
4. Press
5. Go off-hook and hang up.
98
(simultaneously).
Table
LEDS
FB2 FB1
ON ON
ON OFF
OFF ON
OFF OFF
ON ON
ON OFF
OFF ON
OFF OFF
to set the above data.
(simultaneously).
.
to view IPT firmware version (application and boot versions, read
to view IPT MAC address (read only).
17).
Transmit Level
Level 7 (min.)
Level 6
Level 5
Level 4
Level 3 (initial value)
Level 2
Level 1
Level 0 (max.)
Strata CTX DKT/IPT Telephone 10/03