Ip Telephone Start Up Sequence - Toshiba DKT User Manual

IPT1020-SD Settings
IPT-to-IP Network Connection Instructions

IP Telephone Start Up Sequence

After the IP telephone network setting has been programmed, the following displays
occur after the IP telephone is hung-up:
Action
1. IPT
initializes.
2. IPT
searches
for IP
address.
3. IPT
searches
for BIPU.
96
LCD Indication
INITIALIZING
PLEASE WAIT...
IPaddress setting...
Searching BIPU...
Remarks
Possible errors:
• IP address is not
set.
• No DHCP server,
etc.
If error occurs, IP address setting is carried out
continuously.
Retries every 10 seconds.
Possible errors:
• BIPU is not found
"time out."
• BIPU is not found
(Station ID
automatic setting).
• BIPU is not found
(StationID manual
setting)
• Multicast address is
not registered
(BIPU IP address
setting mode is automatic setting by multicast)
• BIPU IP address is
not registered
(BIPU IP address
setting mode is manual setting.
Strata CTX DKT/IPT Telephone
IPaddress setting...
Can't set IPaddress
Searching BIPU..
BIPU not found
Searching BIPU..
Can't get StationID
Searching BIPU..
StationID unmatch
Not exist Multicast addr
Not exist BIPU address
10/03