Pdku - Digital Telephone Interface Unit; Pdku Hardware Options; Pdku Installation; Pdku Programming - Toshiba strata CT Installation & Maintenance Manual

PDKU – Digital Telephone Interface Unit
System:
Circuits per PCB:
Interfaces with:
Older Version(s):

PDKU Hardware Options

H

PDKU Installation

C

PDKU Programming

Strata CT I&M Manual October 2000
Strata CT
eight digital telephone circuits
digital telephones (with or w/o PCIU-DI or ADM)
DDSS console (circuit 8 only)
DDCB (circuit 5 only–ports 004, 012, 020, and 028)
DKT2001 single line digital telephones (see Note below)
None
PDKU does not have to be configured for any option. Refer to
for instructions on how to connect digital telephones, DDCBs, and DDSS consoles to the
PDKU2, as well as how to upgrade digital telephones with these options: a Speaker Off-hook
Call Announce upgrade (DVSU), a Headset/Loud Ringing Bell Interface (HHEU) and the
PCIU-DI to provide TAPI connectivity.
Note DKT2001 telephones do not support HHEUs, DADMs, DDSSs, PCIU-DIs, or
DVSUs.
There are no controls or indicators on the PDKU
1. Insert the PDKU (component side facing right) into the appropriate slot, and apply firm,
even pressure to ensure proper mating of connectors.
2. After installing the PDKU, gently pull the PCB outward. If the connectors are properly
mated, a slight resistance is felt.
Program 03
N
Specify Code 61 to indicate a station line PDKU.
N
Specify Code 62 to indicate a PDKU supporting Speaker Off-hook Call Announce
(OCA) and/or PCIU.
N
Specify Code 64 to indicate a PDKU supporting a DDSS console, Speaker OCA.
N
For PCIU TAPI mode only and Handset OCA, code 61 can be used and the PDKU can
be in any universal cabinet slot.
Universal Slot PCBs
Chapter 5 – Station Apparatus
(Figure 3-3).
3-7