Toshiba strata CT Installation & Maintenance Manual page 128

Universal Slot PCBs
If the RMDS modem standard should be CCITT/V.22bis, turn LED 15 On. If the RMDS
standard should be Bell 212A, turn LED 15 Off. Most Hayes compatible modems will
function with either standard. Check with the modem manufacturer's documentation to verify
which protocol should be used. When the system is initialised the Bell 212A standard is set
(LED 15 Off).
Program 77-4, LED 01/LED 02: Enables CLI and/or DDI information for ACD calls to be
sent from the RSIU OA port.
➤
➤
Program 77-4 allows LED 01 and LED 02 to be turned On simultaneously, allowing CLI and
DDI information to be sent from the OA port for ACD calls.
The system will initialise with LED 01 and 02 Off—no CLI or DDI information will be sent
from the OA port for ACD calls.
H
C
3-34
Turn LED 01 On if the OA port should send CLI information for ACD calls.
Turn LED 02 On if the OA port should send DDI information for ACD calls.
Strata CT I&M Manual October 2000