Installation; Programming - Toshiba strata CT Installation & Maintenance Manual

Station Apparatus
6.
7.

Installation

If required to achieve maximum distance (greater than 305 metres), install a two-pair house
cable (or external power).

Programming

Program 03: Specify Code 61 to indicate a station line PDKU.
Program 27: Adjusts initial off-hook volume level for digital telephone handsets.
Program 38: Specify Code 21.
Program 39: Specify button 01 as a [PDN].
Important!
H
Note
Program 92-5: Initialises initial ringing, speaker, and muted ring volume levels of digital
telephones.
Also, refer to the Numerical Programming Listing in the Strata CT Programming Manual for
C
other station-related programs.
DVSU Upgrade Installation
Figure 5-6
5-10
Route the cord into the hollow portion of the base.
Mount the phone on the wall mounting modular connector plate.
Do not program Exchange lines or secondary line appearances onto button 01
or in any other position. Since the system assigns Exchange lines 01~17 by
default, be sure to remove any Exchange line appearances by programming
them as Station Speed Dial buttons (code
If the Speed Dial Select button is removed, the
Dial Select button. While on an outside call, the user must press
and # DTMF tones for the duration of the call.
activate the
*
Red Wire
DVSU Installation for Digital Telephones
Red
Wire
1483
Strata CT I&M Manual October 2000
).
*
key becomes the Speed
*
then # to
*