Cabinet Slots; Processor Pcb Subassemblies; Base Cabinet - Toshiba strata CT Installation & Maintenance Manual

Processor PCB Subassemblies

DTMF Receiver Subassembly (BRCS)
RKYS Feature Key Upgrades
Table 1-3
Features Provided to all Strata CT Processors
Built-in Auto Attendant
H
ACD
ACD with MIS data information
1
Built into all Processors as standard.
C

Cabinet Slots

Base Cabinet

Figure 1-2 Strata CT Base Cabinet Interior
Strata CT I&M Manual October 2000
Subassemblies required for some features can be added to the processor PCBs. These are
described in the following paragraphs.
The BRCS is required to translate DTMF tones needed for DISA, Tie, voice mail, AA
announcement devices, DTMF standard telephones, and other devices.
The BRCS attaches to the processor PCB and is available with either 4, 8, or 12 (BRCS-4, -8
or -12) shared receiver circuits. See
The system can be upgraded for built-in AA, Automatic Call Distribution (ACD), Software
Management Information System (SMIS) and Insight DK with the following feature keys
that attach to the processor. See
RKYS Features
* Enhanced ACD with MIS data information.
The Base Cabinet has two slots reserved for the system processor PCBs and eight universal
slots, labeled "S101~S108," that can accommodate station, line or option PCBs
Figure 1-2). It also houses a power supply described later in this chapter.
B101 B102 S101 S102 S103
S104 S105 S106 S107 S108
B101 B102 S101
Table 1-5 on Page 1-6
Table 1-3 for features provided by RKYS2~4
RKYS1
S102 S103 S104 S105 S106 S107 S108
Strata CT Configuration
for more information.
1 RKYS2 RKYS3
X X X
X X
X
DC OUT
-24V1
-24V2
BATT
+
-24V3
-
-24V4
POW
+5V AC IN
-5V
P.F.
POWER
RESET
ON
EXP
BASE
OFF
FG
5002
5037 CT I&M
.
RKYS4*
X
X
X
(see
1-3