Emc Compliance; Type Approval - Toshiba strata CT Installation & Maintenance Manual

2. EMC Compliance

Equipment details
H
C

3. Type Approval

Table A2
Interface Type
PCOU2F
RPTU1F
RBSU1A & RBSU2A
PACU2F
PEMU2F
Strata CT I&M Manual October 2000
Toshiba Information Systems (U.K.) Ltd declare that the Strata CT complies with the EEC's EMC
directive, Directive No. 89/366/EEC as amended by directive 92/31/EEC. The product has been
assessed and found to comply with the following generic standards, in the present absence of any
product specific standards:
N
EN55022:1998, (Emissions)
N
EN52024:1998 (Immunity)
The notes listed below form part of the products' compliance with the aforementioned European
Norm.
To ensure EMC compliance the system must installed in accordance with the instructions in the
"Installation and Maintenance" manual. In order to maintain compliance any shielded cables
supplied and/or ferrite suppression cores must be used.
Base Cabinet Dimensions:
Height - 296mm
Width - 672mm
Depth - 270mm
Weight - 14.1kg (fully equipped)
Warning!
This is a Class A product. In a domestic environment this Product may cause
radio interference in which case the User may be required to take adequate
measures
Toshiba Information Systems (UK), Ltd, (TIU), hereby declares that the Strata CT product
complies with the requirements of the EC Directive 1999/5/EC, (aka Radio &
Telecommunications Terminal Equipment directive). A manufacture's Declaration under this
Directive allows connection to the relevant Public Network Services and the right to place the
Product on the market.
The Strata CT is classified as "Call Routing Apparatus" it is intended to be connected to the
various Public Telecommunications Network Services for the purpose of generating and
terminating "calls". Table A2 below lists the intended purposes of all the system interfaces.
Analogue Loop Calling Unguarded Lines
Euro ISDN30 service. Approved to CTR 4.
Euro ISDN2 service. Approved to CTR 3.
Analogue 4 wire Private Circuits, uses AC15 signalling. Approved to TBR 17.
Analogue 4 wire Private Circuits, uses DC5 signalling. Approved to TBR 17.
The system must be installed in accordance with BS6701 parts 1 and 2, the latest issue shall apply.
Expansion Cabinet Dimensions:
Height - 254mm
Width - 672mm
Depth - 270mm
Weight - 14.1kg (fully equipped)
Network Service
Notes to Users
-
A 3