Basic Recording; Dubbing Mode; Playback - Toshiba D-VR17KB Owner's Manual

E9GA0BD_EN.book Page 31 Monday, March 26, 2007 10:14 AM
2
Select "Recording" using [U / D],
then press [ENTER].
3
Select "Recording Audio Select
(XP)" using [U / D], then press
[ENTER].
4
Select "PCM" or "Dolby Digital"
using [U / D], then press [ENTER].
General Setting

Playback

Display
Video
Recording Audio Select (XP)
Recording
PCM
Clock
Dolby Digital
Channel
DivX
Reset All
PCM: Records PCM audio for the best
quality sound.
Dolby Digital: Records Dolby Digital audio for good
quality sound.
5
Press [SETUP] to exit.
Note
• "PCM" stands for Pulse Code Modulation. It
changes analogue sound to digital sound without
compressing audio data.
• When the recording mode is set at other than XP,
the unit records "Dolby Digital" audio automatically
even if you selected "PCM".

Basic Recording

Video VR
DVD-RW DVD-RW DVD-RW DVD-RW
D D VD+R DVD+R VD+R
Follow the steps below to record a TV programme.
1
Press [ ON / STANDBY] to turn on
the unit.
Turn on the TV and be sure to select the input to
which the unit is connected.
2
Press [DVD].
3
Press [OPEN / CLOSE O] to open the
disc tray.
4
Place the disc on the disc tray with
its label facing up. Be sure to align
the disc with the disc tray guide.
Auto Chapter
Recording Audio Select (XP)
Auto Finalise
Aspect Ratio (Video mode)

Dubbing Mode

Make Recording Compatible
Bilingual Recording Audio
External Input Audio
DVD-R DVD-R DVD+RW D D VD+R VD+RW W
Disc tray
guide
5
Press [OPEN / CLOSE O] to close
the disc tray.
6
Select the recording mode using
[REC MODE].
(See page 26.)
7
Select the desired channel to record
using [PROG. ] or
/
[the Number buttons].
8
Press [REC ] to start recording.
I
The "●" mark will be displayed for 5 seconds.
To pause the recording, press [PAUSE p]. Press
[PAUSE p] or [REC
] again to restart the
I
recording.
9
Press [STOP S] to stop the recording.
This operation may take a few moments to
complete.
Hint
• You can change the channel while in the REC pause
mode.
Note
• Recording starts immediately and continues until the
disc is full or you stop recording.
• If the clock is not set, the space for a date and time
of title names will be 01/01/07 and 00:00.
• You cannot change the recording mode in the REC
or REC pause mode.
• If you want to monitor the programme that you are
recording, make sure the device such as a Satellite
Box is turned off or press [DISPLAY] when it is
connected to AV2.
• Up to 99 titles can be recorded on the DVD-RW/-R
discs.
• Up to 49 titles can be recorded on the DVD+RW/+R
discs.
• NTSC recording is prohibited in this unit.
• You can play back a title on one device while making
a recording on other device. To do so, simply select
the device (DVD or VCR) you like to use for the
playback by pressing [DVD] or [VCR] button during
DVD / VCR recording. And then follow the normal
playback procedure.
31
EN