3. Remove the Right Cover [1].
CAUTION:
When the pin [4] is removed, the Right Cover [1] may fall off. Be sure to hold the lower part of the Right Cover while removing
the pin.
• 1 Connector [2]
• 1 Wire Saddle [3]
• 1 Pin [4]
Removing the Cassette Pickup Unit 1
■ Preparation
1. Pull out the cassette.
2. Open the Front Cover.
3. Open the Right Cover.
4. Remove the Right Lower Cover (when the Cassette Pedestal is installed, skip this step).
5. Remove the Right Rear Cover
1x
1x
[2]
(Lower)."Removing the Right Rear Cover (Lower)" on page 182
278
4. Disassembly/Assembly
[4]
[1]
[3]