Sony Vision Exchange PEQ-C100 Help Manual page 26

Help Guide (for end users)
Vision Exchange Version 1.3
PEQ-C100/PEQ-C130/PES-C10
Starting Pod Sharing
Note
The IP address configured for a device is displayed on the top right of the screen on the main unit and Pods. When configuring
main unit and Pod connections, check and specify the displayed IP address.
When using Pod sharing for the first time, configure the connection between the main unit and each Pod.
1
1. Start the main unit, and press
The [Administrator Password] dialog box appears.
Enter the administrator password, and press [Login].
2.
If an administrator password has not been configured, leave the field empty and press [Login].
The [Administrator Menu] screen appears.
3. Open the [Setting] – [Pod Sharing] page.
4. Enter the IP address of the Pod you want to connect in [Pod Address], and press
5. Repeat step 4 for other Pods you want to connect, and press [OK].
In addition, configure the power supply ON/OFF link and session link operation, as required.
on the Home screen.
26
.