Front Panel; Rear Panel - Sony Vision Exchange PEQ-C100 Help Manual

Help Guide (for end users)
Vision Exchange Version 1.3
PEQ-C100/PEQ-C130/PES-C10
Names of Parts of the Main Unit

Front panel

1.
Power switch
Supplies power to the main unit.
When power is turned on, the LED around the switch is lit green.
2.
USB connectors (USB 2.0)
Use to connect to a mouse (sold separately) or USB flash drive (sold separately).

Rear panel

1.
Security slot
Connect an anti-theft security lock cable.
2.
LAN 1 and 2 connectors (RJ-45)
Connect to a network using LAN cables.
Note
The use of the LAN 1 connector only is recommended.
If the LAN 2 connector is used at the same time, the protocol used by Vision Exchange must be transmitted and received by
the correct NIC. To use LAN1 and LAN2 together, the network administrator must set the appropriate routing in the Windows
settings. Failing to do so may cause unexpected trouble, such as problems with mirroring images.
The LAN 1 and LAN 2 connectors have the same function. There is no function to restrict external access, such as by web
access, to either connector.
There is no mutual communication between LAN 1 and LAN 2 by factory default.
Do not set LAN 1 and LAN 2 to the same subnet.
3.
LINE-IN (audio line input) connector (mini jack)
Connect to the audio output connector of an audio device.
4.
LINE-OUT (audio line output) connector (mini jack)
Connect to the audio input connector of a speaker or other device.
Audio from an audio device connected to the LINE IN connector or audio from a user device can be output from a
speaker.
8