Advertisement
IR Illuminator 5000
Adjustments
To adjust the sensitivity (Photocell adjust
1. Use a thick flathead screwdriver to remove the protective
sealing cap
2. Use a small screwdriver to adjust the internal control:
–
–
3. Put the protective sealing cap back in place and secure.
Bosch Security Systems
www.a1securitycameras.com email: sales@a1securitycameras.com
8 mm
.
1
To use the remove switching control input, turn the
control fully counterclockwise. (Now the IR LED lights
when the green and blue wires are not connected; it
does not light when the wires are connected.)
To set the light level at which the illuminator switches
on, turn the control counterclockwise to turn on the
illuminator when there is more light; turn it clockwise
to turn it on when it is darker. (The factory setting
turns on the illuminator at approximately 30 lx and
turns it off at approximately 70 lx.)
Available from A1 Security Cameras
Connection | en
1
):
2016.8 | 1.0 | AM18-Q0715
11
Advertisement
