Advertisement
IR Illuminator 5000
3
Connection
Power
–
To power the illuminator connect a 12 to 32 VDC or a
24 VAC supply from a SELV class 2 power supply to wires
5 (+ red) and 6 (- black).
Illuminator masters the camera
To use the light sensor in the illuminator to switch the day/night
function of the camera:
1. Connect wires 1 (+ white) and 2 (- yellow) to the alarm
input of the camera.
2. If required, adjust the Photocell adjust control to
determine the switching points of the illuminator.
Camera masters the illuminator
To control illuminator switching from the camera:
1. Turn the Photocell adjust control fully counterclockwise.
2. Connect a relay output from the camera to wires 3 (–
green) and 4 (+ blue).
Bosch Security Systems
www.a1securitycameras.com email: sales@a1securitycameras.com
{
WH
1
2
YE
GN
{
3
4
BU
5
RD
+
-
6
BK
Available from A1 Security Cameras
Connection | en
2016.8 | 1.0 | AM18-Q0715
9
Advertisement
