Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Construction Equipment
  5. BT 90 Series
  6. Operator's manual

Husqvarna BT 90 Series Operator's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
BT 90
Default Operator's manual
2-18

Advertisement

loading

Related Manuals for Husqvarna BT 90 Series

Summary of Contents for Husqvarna BT 90 Series

  • Page 1 BT 90 Default Operator's manual 2-18...

  • Page 2: Table Of Contents

    Contents Introduction..............2 Maintenance..............12 Safety................4 Troubleshooting............13 Assembly................ 7 Transportation, storage and disposal......14 Operation................ 9 Technical data.............. 15 Introduction Product overview 1. Handle 8. Operator's manual 2. Winch 9. Type plate 3. Stretching screw 10. Rating plate 4. Coupling Product description 5.
  • Page 3 Be careful and use the product correctly. Husqvarna AB Husqvarna 561 82 Husqvarna Read the manual carefully and make sure Sweden that you understand the instructions before you use the product.

  • Page 4: Safety

    Safety Safety definitions • Keep the product clean. Make sure that you can clearly read signs and decals. Warnings, cautions and notes are used to point out • Do not use the product if it is defective. specially important parts of the manual. •...
  • Page 5 Vibration safety • Cancer • Birth defects • Skin inflammation WARNING Read the warning instructions • Use correct equipment to decrease the quantity of that follow before you use the product. dust and fumes in the air and to decrease dust on work equipment, surfaces, clothing and body parts.
  • Page 6 Do not use adapter safety devices are defective, speak to your plugs with grounded products. Power plugs without Husqvarna service agent. modifications, and correct power outlets decrease the risk of electrical shock. Fuel safety •...

  • Page 7: Assembly

    • Do not connect a damaged power cord to the • Clean the product to remove dangerous material product. before you do the maintenance. • Do not touch the power cord if it becomes damaged • Disconnect the spark plug cap before you do the during operation of the product.
  • Page 8 To install the truss screed extension 5. Move the truss screed sections together until the bolt (D) goes into the holder (F). 1. Remove the nuts (A). 6. Turn the bolt (D) with a screwdriver. Note The bolt has a right hand thread. 7.

  • Page 9: Operation

    2. Install the outrigger with the nuts (A) and (B). 3. Adjust the outrigger with the nuts (C) and (D). Operation Introduction To make the bottom edge of the product straight 1. When the product is assembled, put the ends on WARNING Read and understand the safety trestles to free the bottom edge of the product.
  • Page 10 in the winch cables are kept and it is easier to control 4. Turn the stretching screw (B) to adjust the angle. the movement of the product. 5. Tighten the nuts for the screws (A). If the product has a fuel drive unit, it is necessary to lift 6.
  • Page 11 • During operation, do a check of the stretching 2. Pull out the winch cable and attach the carabiner (C) screws and the locknuts at regular intervals. Tighten at the remote end of the work area. the stretching screws and the locknuts if it is 3.

  • Page 12: Maintenance

    Maintenance Introduction • Use a high-pressure washer to clean the product. WARNING Read and understand the safety CAUTION Do not point the water directly chapter before you do maintenance on the at the motor of an electric drive unit. product. To do daily maintenance CAUTION Before you clean a fuel drive unit with a high-pressure washer, put a...

  • Page 13: Troubleshooting

    Troubleshooting Problem Drive unit Cause Solution The product does BT 90 EI The motor ON/OFF switch Set the motor ON/OFF switch to the ON posi- not start. is in the OFF position. tion. No power in the power out- Replace or repair the power outlet. let.

  • Page 14: Transportation, Storage And Disposal

    • When the product is no longer in use, send it to a the product safely. The rating plate on the Husqvarna dealer or discard it at a recycling product shows the product weight. location. WARNING Do not lift a damaged product.

  • Page 15: Technical Data

    Technical data Technical data Electric Petrol Engine brand, type Honda, GX200 Voltage, V Phases Frequency, Hz Power, kW/hp @rpm 2.2 (3) 4.1 (5.5) @3600 Full load current,A 4.24 Speed, rpm 2850 2850 Maximum screed lenght, m (ft) 12 (39.4) 12 (39.4) Weights and dimensions Total length, Operation...
  • Page 16 Product dimensions BT 90 EI 980 mm/38.6 in. 560 mm/22 in. 545 mm/21.5 in. BT 90 GI 980 mm/38.6 in. 560 mm/22 in. 610 mm/24 in. 1499 - 001 -...
  • Page 17 Truss screed section, 1 m/3.2 ft. 375 mm/14.8 in. 1000 mm/39.4 in. 420 mm/16.5 in. Truss screed section, 2 m/6.5 ft. 375 mm/14.8 in. 2000 mm/78.7 in. 420 mm/16.5 in. 1499 - 001 -...
  • Page 18 Truss screed section, 3 m/9.8 ft. 375 mm/14.8 in. 3000 mm/118.1 in. 420 mm/16.5 in. 1499 - 001 -...
  • Page 19 1499 - 001 -...
  • Page 20 www.husqvarnacp.com Original instructions 1142373-26 2020-04-14...

This manual is also suitable for:

Bt 90 eiBt 90 gi