Contents Introduction..............2 Maintenance..............5 Safety................2 Storage and disposal............5 Assembly................ 4 Technical data..............6 Operation................ 4 Introduction Product description 1. Handle 2. Swivel The product is a manually operated concrete screed. 3. Beam Intended use 4. Operator's manual The product is for professional operation only. The Product liability product is used for compaction of concrete.
Page 3
Dust safety must read and understand the contents of this operator’s manual. • Save all warnings and instructions. WARNING: Read the warning instructions • Comply with all applicable laws and regulations. that follow before you use the product. • The operator and the employer of the operator must know and prevent the risks during operation of the •...
Safety instructions for maintenance • Do not change the product. Modifications that are not approved by the manufacturer can cause serious injury or death. • Always use original accessories and spare parts. WARNING: Read the warning instructions Accessories and spare parts that are not approved that follow before you use the product.
6. When you start at the next section of the concrete 2. Put the handle on your shoulder. surface, put 15 cm/5.9 in. (A) of the beam on the 3. Pull the beam rearward. At the same time turn the smooth concrete surface to make an overlap.
Disposal of the product • When the product no longer is used, send it to a Husqvarna dealer or discard it at a recycling • Obey the local recycling requirements and applicable location. regulations. Technical data Technical data Total weight, kg/lb 7.5/16.5...