Advertisement
Installation Guide
Terminating a Ground Cable with an OT Terminal
Strip a ground cable.
1
A: OT terminal
B: ground cable
C: exposed cable conductor
L1: length of the exposed cable
NOTE
When you are skillful, you can determine L1
based on the length of the OT terminal lug.
CAUTION
When striping off the insulation layer of the
ground cable, take care not to damage or nick
the metal conductor of the cable.
Mapping between the cross-sectional area of a cable
conductor (C) and the length of an exposed cable (L1)
Cross-sectional
L1 (mm)
area of C (mm2)
1
7
1.5
7
2.5
7
4
8
Fit the exposed cable into the
2
3
OT terminal.
CAUTION
Ensure that the cable conductor does not
protrude more than 2 mm (L2) from the OT
terminal.
Crimp the OT terminal lug.
Crimp the OT
terminal lug.
NOTE
The impression left from crimping the lug may
differ depending on the crimping tool used.
06
Advertisement
