Advertisement
fig.6
6.3.
eMptyinG:
fig.7
6.3.1.
Make sure valves (fig.7.3,4 and fig.8.5) are closed.
6.3.2.
Open valve (fig.8.6).
6.3.3.
Connect compressed air (0.5Bar/7.25psi) to quick
coupling (fig.7.2). open the valve (fig.7.1) until all the
fluids have been transferred from the reservoir.
6.3.4.
disconnect from air supply and vent any pressure
remaining in the reservoir by opening drainpan valve
(fig.8.5) and/or air valve (fig.7.2).
note! The unit storage tank has been fitted with a safety valve factory calibrated to 0.5Bar/7.25psi.
note! Some cars have a built-in suction probe. In this case, check vehicle manufacturer's data to determine the correct suction probe
to be used (fig.9).
© Jack Sealey limited
fig.8
Original Language Version
AK459dX.V2 Issue 2 19/11/18
Advertisement
