Advertisement
1. Rectangular opening
(decal)
2. Hole (decal)
2.
Align the rectangular openings and hole in the
decal with the rectangular openings and hole in
the switch panel as shown in
3.
Apply the decal to the switch panel.
Installing the Plugs to the Switch
Panel
1.
Align the plug to the rectangular openings in the
switch panel
(Figure
1. Rectangular opening
(switch panel)
2.
Insert the plug into the opening until the plug
snaps securely into the panel
3.
Repeat step
1
and
4).
Figure 3
3. Rectangular opening
(switch panel)
4. Hole (switch panel)
Figure
3.
4).
Figure 4
2. Plug
(Figure
4).
2
for the 3 other plugs
4
Assembling the Wire
Harness to the Switch
Panel
Parts needed for this procedure:
g245155
1
Fuse-block mount
1
Wire harness
2
Socket-head screw (#10 x 3/4 inch)
4
Flange locknut (#10)
2
Carriage bolt (#10 x 1/2 inch)
Assembling the Fuse-Block Mount
to the Wire Harness
1.
Align the holes in the fuse-block mount to the
holes in the fuse block of the wire harness as
shown in
Note:
block are aligned up.
g245156
(Figure
1. Wire harness
2. Socket-head screw (#10 x
3/4 inch)
3. Fuse-block mount
3
Figure
5.
Ensure that the mounting rails of the fuse
Figure 5
4. Fuse block (mounting rails
up)
5. Flange locknut (#10)
g250867
Advertisement
