Fujitsu BS2000 SE Series Basic Operating Manual page 89

i
The control panel and SVP frames of the Server Unit are described in the "Server Unit /390" Operating
Manual [ ]. 2
3. Switch off the optional Server Units x86 (SE700/SE500 only)
> As the administrator, BS2000 administrator or a privileged operator, switch off the Server Unit using the SE
Manager (menu Hardware -> Units Units
manual [ ]. 5
When the Server Unit is switched off, the BS2000 system is shut down properly taking into account the
remaining runtime specified.
Before the Server Unit is switched off, the power-on indicator lights up green, and after it has been switched
off, it lights up orange. Check this before continuing.
i The controls and indicators of the Server Unit are described in the "Server Unit x86" Operating Manual [ ].
Further Server Units x86 are switched off in the same way.
4. Switch off the MU
> Switch off the MU using the SE Manager (menu
"Operation and Administration" manual [ ]
Before the MU is switched off, the power-on indicator lights up green, and after it has been switched off, it
lights up orange (item 11 resp. 8 in
Redundant MUs are switched off in the same way.
5. Switch off the optional hardware components
> Switch off the ETERNUS LT140 resp. ETERNUS LT40 S2 tape library using the On/Off switch on the front
(see the "Additive Components" Operating Manual [ ]).
> Switch off any other connected hardware components.
, tab, Switch off symbol), see the "Operation and Administration"
Hardware -> Units Units
5
figure 16/17/18 ). Check this before continuing.
4
, tab, Switch off symbol), see the
3
89