CIP5000 series storage
Notice!
The enclosure is equipped with LED indicators on the power supply units. Check the LEDs
after powering the devices on to make sure the cooling and power status for the power
module is normal.
4.5.1
Power on
With the power supplies connected, the system can now be powered on.
To power on the subsystem, press the power button on the left handle, then observe OPAS
LED on the left handle and LEDs on the right handle.
Power button
OPAS LED
Figure 4.11: Front panel components on the left handle
Figure 4.12: Front panel LEDs on the right handle
Bosch Security Systems B.V.
USB ports
Power
System status
Global RAID status
Global HDD activity
(Reserved)
System heartbeat
Quick installation guide
Setup tasks | en
17
2019-10 | V01 | F.01U.380.028