Environmental Standard Compliance; Laser Product Standard Compliance; Acoustic Noise Emission Standard Compliance; Electrical Safety Guidelines - Nokia 7368 ISAM ONT E-240W-A Product Manual

ETSI ONT safety guidelines
2.2.3
The ONT equipment complies with the EN 300 019 European environmental
standards.
2.2.4
For most ONTs, the ONT equipment complies with EN 60825-1 and IEC 60825-2 for
laser products. If there is an exception to this compliance regulation, you can find this
information in the standards compliance section of the unit data sheet in this Product
Guide.
2.2.5
The ONT equipment complies with EN 300 753 acoustic noise emission limit and test
methods.

2.3 Electrical safety guidelines

This section provides the electrical safety guidelines for the ONT equipment.
2.3.1
The use of any non-Nokia approved power supplies or power adapters is not
supported or endorsed by Nokia. Such use will void any warranty or support contract
with Nokia. Such use greatly increases the danger of damage to equipment or
property.
20
Release 06.00.00h | January 2019 | Edition 08

Environmental standard compliance

Laser product standard compliance

Acoustic noise emission standard compliance

The ONTs comply with the U.S. National Electrical
Note 1 —
Code. However, local electrical authorities have jurisdiction
when there are differences between the local and U.S.
standards.
The ONTs comply with BS EN 61140.
Note 2 —

Power supplies

3FE-46974-AAAA-TCZZA
7368 ISAM ONT E-240W-A Product Guide
Issue: 01