In this guide
•
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
•
•
•
Installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
•
•
•
•
Introduction
This document provides instructions to install a 1U, 1.5U, or 2U switch (or SAN Router) in a telecommunications
(Telco) cabinet using the Mid-Mount Kit.
The supported switches are listed in
TABLE 1
Supported switches
Switch height
1U
2U
Installation requirements
Allow 15 to 30 minutes to complete this procedure. Note the following requirements to ensure correct installation
and operation:
•
Verify that the additional weight of the switch does not exceed the cabinet's weight limits.
Mid-Mount Rack Kit (Switch) Installation Procedure
53-1001791-01
Table
1.
Switch model
PowerConnect B-200E
PowerConnect B-300
PowerConnect B-4100
PowerConnect B-5000
PowerConnect B-5100
PowerConnect B-7500 series
PowerConnect B-7600
PowerConnect B-7800
PowerConnect B-8000
PowerConnect B-VA-40FC
PowerConnect B-4900
PowerConnect B-5300
PowerConnect B-AP7420
3