1
Bracket, front righ
5
Screw, 10-32 x 5/8 in., panhead Phillips
FIGURE 3
Attaching front rails to a cabinet
Attaching rear brackets to a cabinet
Complete the following steps to attach the rear brackets to the cabinet.
1. Position the right rear bracket (Item 2) in the right rear of the switch
2. Attach the brackets using three 6-32 x 1/4 in. screws (Item 4) and retainer nuts (Item 6).
3. Adjust the brackets to cabinet depth and tighten the Item 6 screws to a torque of 9 in.-lbs (10 cm-kgs).
4. Repeat
step 1
through
Mid-Mount Rack Kit (Switch) Installation Procedure
53-1001791-01
6
Retainer nut, 10-32
step 3
to attach the left rear bracket (Item 1).
(Figure
4).
7