Advertisement

EW7W4762OFB
EN
Washer Dryer
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux EW7W4762OFB

  • Page 1 EW7W4762OFB Washer Dryer User Manual...
  • Page 2: Table Of Contents

    18. TECHNICAL DATA..................47 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4 Do not install the appliance behind a lockable door, a • sliding door or a door with a hinge on the opposite side, that would prevent the appliance door from being fully open. Connect the mains plug to the mains socket only at •...
  • Page 5: Safety Instructions

    ENGLISH Do not use the appliance if items have been soiled • with industrial chemicals. Do not dry unwashed items in the wash dryer. • Items such as foam rubber (latex foam), shower caps, • waterproof textiles, and rubber backed articles and clothes, or pillows fitted with foam rubber pads should not be dried in the washer dryer.
  • Page 6 2.4 Use the drum to prevent an internal damage. • Always take care when moving the WARNING! appliance as it is heavy. Always use Risk of injury, electric shock, safety gloves and enclosed footwear. fire, burns or damage to the •...
  • Page 7: Installation

    ENGLISH 3. INSTALLATION 3.2 The appliance is equipped WARNING! with ... Refer to Safety chapters. 3.1 Be prepared for installation It is recommended that installation is carried out by two persons. 3.3 Unpacking WARNING! Use the gloves. WARNING! Remove all the packaging and the transit bolts before installing the appliance.
  • Page 8 3. Remove the polystyrene protection from the bottom. 4. Return the appliance in vertical position and remove the socket polystyrene protection. 5. Remove the power supply cable and the drain hose from the hose holders. It is possible to see water flowing from the drain hose.
  • Page 9 ENGLISH 7. Close the holes with the plastic caps you find in the user manual bag. Put the smallest cap F in upper hole and the two bigger caps G in lower holes. We recommend that you keep the packaging and the transit bolts for any movement of the appliance.
  • Page 10 3.5 Hose and cable connection 1100 mm 1450 mm 1020 mm 760 mm 1360 mm 900 mm The inlet hose 1. Remove the inlet hose from inside the drum. 2. To connect the water inlet hose towards the proper direction and with the proper...
  • Page 11 ENGLISH 5. Connect the water inlet hose to the cold water tap with 3/4 thread. WARNING! Make sure that there are no leaks from the couplings. Use the hose supplied with appliance. Do not use an extension hose if the inlet hose is too short. Contact the Authorised Service Centre for an inlet hose replacement.
  • Page 12 To a wall-pipe Directly to a built-in drain pipe in the room wall and tighten it with the supplied cable tie You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension.
  • Page 13 ENGLISH Before proceeding with appliance building in, bring it near the recess and preposition the inlet hose, the drain hose and the mains cable. WARNING! Make sure they are not kinked or squashed. 3.7 Preparation and assembly of the cupboard door The dimensions of the cupboard door should be: •...
  • Page 14 If the cupboard door has to be opened from left to right, invert the position of the hinge supports M with the magnetic plate N and lower plate O. Make sure that the plate with magnet is on the upper position.
  • Page 15 ENGLISH Hinges To mount the hinges it is necessary to drill two holes (dia. 35 mm, depth 12.5 - 14 mm depending on the depth of cupboard door) on the inner side of the door. The hinges will be fixed to the door by means of the four supplied screws A.
  • Page 16: Product Description

    4. PRODUCT DESCRIPTION 4.1 Appliance overview 10 11 12 Hinge supports Drain pump filter Detergent dispenser Front feet for levelling the appliance Control panel Drain hose Magnetic plate Mains cable Door handle Inlet hose connection Rating plate Back feet for levelling the appliance Plate with rubber beater 5.
  • Page 17 ENGLISH Time Manager touch button and The permanent options are permanent Child Lock option set by holding pressed the relative button for at least 3 Prewash touch button and seconds. permanent Extra Rinse option Programme dial Spin touch button Display Temp.
  • Page 18: Dial And Buttons

    After the SensiCare System detection, it flashes when the laundry load exceeds the maximum declared load of the selec‐ ted programme. Refer to "The SensiCare System load detec‐ tion " paragraph. Auto Dry indicator: Iron dry Cupboard dry Extra dry Child safety lock indicator.
  • Page 19 ENGLISH phase uses more water for some This option increases the washing programmes programme duration. • Activate the Rinse Hold option. The final spin is not performed. The 6.8 Time Manager water of the last rinse is not drained out to prevent the fabrics from With this option you can reduce the creasing.
  • Page 20 When setting a steam programme, this On the display the relevant dryness button allows to chose three steam levels indicator goes on: and the programme duration is reduced • Iron dry: laundry to be ironed. accordingly: • Cupboard dry: laundry to be put •...
  • Page 21: Programmes

    ENGLISH 7. PROGRAMMES 7.1 Programme Chart Programme Refer‐ Maxi‐ Programme description Default tempera‐ ence spin (Type of load and soil level) ture speed load Temperature Spin range speed range Washing programmes 1600 rpm 7 kg White cotton and coloured cotton. Nor‐ (1600- mal, heavy and light soil.
  • Page 22 Programme Refer‐ Maxi‐ Programme description Default tempera‐ ence spin (Type of load and soil level) ture speed load Temperature Spin range speed range 1.5 kg Cottons, Synthetics, Delicates. Short and gentle steam programme to refresh even Steam your very delicate garments, including very delicate garments with sequins, lace etc.
  • Page 23 ENGLISH Programme Refer‐ Maxi‐ Programme description Default tempera‐ ence spin (Type of load and soil level) ture speed load Temperature Spin range speed range 1600 rpm 7 kg White cotton items. This programme re‐ (1600 - moves micro-organisms thanks to a wash‐ Anti-allergy 400 rpm) ing phase with the temperature maintained...
  • Page 24 Programme Refer‐ Maxi‐ Programme description Default tempera‐ ence spin (Type of load and soil level) ture speed load Temperature Spin range speed range Reset position. The display shows dashes only. 1) This programme at 60 °C with a load of 7 kg is the reference programme for energy label data, in compliance with UAE.
  • Page 25 ENGLISH Programme ■ ■ ■ ■ ■ ■ Anti-allergy ■ ■ ■ ■ ■ ■ Sportswear ■ ■ ■ ■ ■ Outdoor ■ ■ ■ ■ ■ Denim ■ One GO 1h 1kg 1) If you set the No Spin option, the appliance performs draining only. 7.2 Woolmark Apparel Care - washed according to the instructions on the garment label and those issued...
  • Page 26 7.3 Automatic drying Dryness Level Type of fabric Load Cottons and Linen up to 4 kg (bathrobes, bath towels, Extra Dry etc) For towelling materials Denim garments up to 3 kg Cottons and Linen up to 4 kg (bathrobes, bath towels,...
  • Page 27: Settings

    ENGLISH 7.4 Timed drying Dryness Level Type of fabric Load Spin Suggested (kg) speed duration (rpm) (mins) Extra Dry Cottons and Linen 1600 170 - 190 For towelling (bathrobes, bath towels, etc) 1600 110 - 120 materials 1600 65 - 75 Denim garments 1200 Cupboard Dry...
  • Page 28: Before First Use

    If you deactivate the acoustic signals, they continue to operate when the appliance has a malfunction. 9. BEFORE FIRST USE 1. Make sure that the electrical power is 4. Set and start a programme for cotton available and the water tap is open.
  • Page 29 ENGLISH 10.3 Filling the detergent and 10.4 Check the position of the additives detergent flap 1. Pull out the detergent dispenser until it stops. - Compartment for prewash phase, soak programme or stain re‐ 2. Press the lever down to remove the mover.
  • Page 30 The drain pump can operate shortly before the appliance fills water. 10.7 Starting a programme with the delay start 1. Touch the Delay Start button repeatedly until the display shows the desired delay time. The related indicator comes on.
  • Page 31 ENGLISH The related indicator flashes. After touching the Start/Pause 2. Change the options. The given button, the SensiCare System starts the information in the display changes laundry load detection: accordingly. 1. The appliance detects the load in the 3. Touch the button Start/Pause first 30 seconds.
  • Page 32 1. Touch the Start/Pause button. • The indicator of the Start/Pause In the display the related door lock button starts flashing. indicator goes off. • The drum still turns at regular 2. Open the appliance door. If intervals to prevent creases in the necessary, add or remove the items.
  • Page 33: Daily Use - Washing & Drying

    ENGLISH 11. DAILY USE - WASHING & DRYING 5. Set the desired options, if there are WARNING! available. Refer to Safety chapters. 6. Tap on the Mode button once to activate also the drying function. Both This appliance is an indicators of the Mode - Wash and automatic washer dryer.
  • Page 34: Daily Use - Drying Only

    2. Touch the Start/Pause button to unlocks. start the programme. The SensiCare • Press the On/Off button for some estimation starts. seconds to deactivate the appliance. In the display the door locked After some minutes from indicator comes on.
  • Page 35: Fluff In The Fabrics

    ENGLISH indicator goes off and the door 2. Touch the Start/Pause to start unlocks. the programme. • Press the On/Off button for some In the display the door locked seconds to deactivate the appliance. indicator comes on. After some minutes from The display also shows the remaining the end of the programme time.
  • Page 36 • Turn multilayered fabrics, wool and • To help the environment, do not use items with printed illustrations inside more than the recommended quantity out. of detergent. • Pre-treat tough stains. • Follow the instructions that you find • Wash heavy soil stains with a special on packaging of the detergents or detergent.
  • Page 37: Care And Cleaning

    ENGLISH 14.7 Items not suitable for • speed of the last spin • dryness level drying • type of laundry • weight of the load Do not set a drying programme for this laundry: 14.10 Additional drying • Synthetic curtains. •...
  • Page 38 15.5 Cleaning the drum Regular detergents already contain water softening agents, but we recommend to Regularly examine the drum to prevent run a cycle with an empty drum and a unwanted deposits. descaling product occasionally. Rust deposits in the drum may occur due...
  • Page 39 ENGLISH 2. Remove the top part of the additive compartment to aid cleaning and flush it out under running warm water, to remove any traces of accumulated detergent. After cleaning, put the top part back into position. 15.7 Cleaning the drain pump WARNING! Disconnect the mains plug from the mains socket.
  • Page 40 1. Open the pump cover. 2. Place a suitable bowl below the drain pump access to collect the water that flows out. Always keep a rag nearby to dry up any water spillages when removing the filter. 180˚ 3. Turn the filter 180 degrees in anti-clockwise direction to open it, without removing.
  • Page 41 ENGLISH 7. If it is necessary, remove fluff and objects from the filter recess. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. 8. Clean the filter under the water tap. 9.
  • Page 42: Troubleshooting

    15.8 Cleaning the inlet hose and the valve filter 45° 20° 15.9 Emergency drain remaining water from the inlet hose and the drain pump. If the appliance cannot drain the water, 1. Disconnect the mains plug from the carry out the same procedure, described mains socket.
  • Page 43 ENGLISH 16.1 Introduction The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre. WARNING! Deactivate the appliance before carrying out any check. In case of major problems, the acoustic signals operate, the display shows an alarm code and the Start/Pause button may flash continuously:...
  • Page 44 16.2 Possible failures Problem Possible solution • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box.
  • Page 45 ENGLISH Problem Possible solution • Make sure that the couplings of the water hoses are tight and there is not water leakages. There is water on the • Make sure that the water inlet hose and the drain hose floor. have no damages.
  • Page 46 Problem Possible solution The fabrics washed in the previous cycle released fluff of a different colour: • The drying phase helps to eliminate some fluff. The laundry is full of dif‐ • Clean the clothes with a fluff remover.
  • Page 47: Consumption Values

    ENGLISH 17. CONSUMPTION VALUES Stated values are obtained in laboratory conditions with relevant stand‐ ards. Different causes can change the data: the quantity and type of laundry and ambient temperature. Water pressure, the supply voltage and the temperature of inlet water may also affect the washing pro‐ gramme duration.
  • Page 48 Maximum wash load Cotton 7 kg Maximum dry load Cotton 4 kg Synthetics 3 kg Spin Speed Maximum spin speed 1550 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 19. ENVIRONMENTAL CONCERNS...
  • Page 49 ENGLISH...
  • Page 50 www.electrolux.com...
  • Page 51 ENGLISH...
  • Page 52 www.electrolux.com/shop...

Table of Contents