Ir Remote Control Operations - Huawei VS-EC-H24R User Manual

VS-EC-H24R&H28R&H29R
User Guide
No. Name
GUARD
It is important to note that you must click the" EDIT "button on either the remote or front
panel on a text field before you're able to edit its content. After you're done entering text,
you must hit the ENTER button to be able to move on to the next field.

1.4 IR Remote Control Operations

The DVR may also be controlled with the included IR remote control, shown in Figure
1-2.
Batteries (2× AAA) must be installed before operation.
Issue 04 (2013-06-15)
Function Description
Guard indicator turns green when the device is
in armed status; at this time, an alarm is enabled
when an event is detected. The indicator turns
off when the device is unarmed. The
arm/disarm status can be changed by pressing
and holding on the ESC button for more than 3
seconds in live view mode.
NOTE
If GUARD indicator is green (default), all alarm
event and exception settings are valid. Otherwise,
alarm event and exception settings will be invalid,
but normal recording will still be available.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Introduction
8