Table of Contents
Advertisement
VS-EC-H24R&H28R&H29R
User Guide
Figure 9-19 Host/Others Settings Menu
Step 4
Enter the Server Port and HTTP Port in the text fields. The default Server Port is 8000
and the HTTP Port is 80, and you can change them according to different requirements.
Step 5
Click the "Apply" to save and exit the interface.
The HTTP port is used for remote IE access.
---End
9.2.10 Configuring Email
The system can be configured to send an Email notification to all designated users if an
alarm event is detected, etc., an alarm or motion event is detected or the administrator
password is changed.
Before configuring the Email settings, the DVR must be connected to a local area
network (LAN) that maintains an SMTP mail server. The network must also be
connected to either an intranet or the Internet depending on the location of the e-mail
accounts to which you want to send notification.
Step 1
Enter the Network Settings interface.
Menu > Configuration > Network
Step 2
Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server
in the Network Settings menu, as shown in Figure 9-20.
Issue 04 (2013-06-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Network Settings
181
Advertisement
Table of Contents
