Address Space - Siemens SIMATIC S7-1500 Manual

Address space

4.1 Address space
The module can be configured in various ways in STEP 7. Depending on the configuration,
additional/different addresses are assigned in the process image input/output.
Configuration options of DI 16x24VDC/DQ 16x24VDC/0.5A BA
You can configure the module with STEP 7 (TIA Portal) or with a GSD file.
When you configure the module by means of the GSD file, the configurations are available
under different abbreviations/module names.
The following configurations are possible:
Table 4- 1 Configuration options
Configuration
1 x 32-channel without value status (1 x 16
digital inputs and 1 x 16 digital outputs)
4 x 8-channel without value status (2 x 8
digital inputs and 2 x 8 digital outputs)
1 x 32-channel with value status for up to 4
submodules
(each 1 x 16 channels for module-internal
Shared Input or Shared Output)
14
Short designation/
module name in the GSD
file
DI 16x24VDC/
DQ 16x24VDC/0.5 BA
DI 16x24VDC/
DQ 16x24VDC/0.5 BA S
DI 16x24VDC/
DQ 16x24VDC/0.5 BA MSI
or MSO
Digital input/output module DI 16x24VDC/DQ 16x24VDC/0.5A BA (6ES7523-1BL00-0AA0)
Configuration software, e.g., with STEP 7 (TIA
Portal)
Integrated in hardware
catalog
STEP 7 (TIA Portal)
V13 or higher
V13 Update 3 or higher
(PROFINET IO only)
V13 Update 3 or higher
(PROFINET IO only)
Manual, 09/2014, A5E32364588-AB
4
GSD file in STEP 7
(TIA Portal) V12 or
higher or STEP 7
V5.5 SP3 or higher
X
X
(PROFINET IO only)
X
(PROFINET IO only)