Sony DNW-75 Installation Manual page 19

Pin No. I/O * * * * * 1 Setting change
36 IN O
37 OUT X
38 OUT O
39 OUT O
40 OUT X
41 OUT O
42 OUT O
43 OUT
X
44 OUT O
45 OUT O
46 OUT
X
47 OUT X
48 OUT X
49 OUT X
50 OUT O
*1: Input ; 47 kZ pull up to +5 V (close/open)
Output ; 10 kZ pull up to +5 V (0 V or open)
*2: The pins described as O mark are possible to change the setting.
Refer to the optional interface manual for changing the setting.
REMOTE1-IN: 9-pin (female)
REMOTE1-OUT: 9-pin (female)
External view
5
9
Pin No. Signal
1 GND
2 RM TX(_)
3 RM RX(+)
4 GND
5 PRIORITY
6 GND
7 RM TX(+)
8 RM RX(_)
9 GND
DNW-75/75P
DNW-65/65P
* * * * * 2 Signal
REC
REV LAMP
DA2 PRESET
DA1 PRESET
FWD LAMP
DA4 PRESET
DA3 PRESET
STOP
VIDEO PRESET
INSERT PRESET
STBY ON
PLAY
REMOTE
ALARM
PREROLL
1
6
Description
CLOSURE SW (REC)
REV LAMP STATUS
DA2 EDIT PRESET STATUS
DA1 EDIT PRESET STATUS
FWD LAMP STATUS
DA4 EDIT PRESET STATUS
DA3 EDIT PRESET STATUS
STOP STATUS
VIDEO EDIT PRESET STATUS
INSERT EDIT PRESET STATUS
STANDBY ON STATUS
PLAY STATUS
REMOTE STATUS
SYSTEM ALARM STATUS
PREROLL STATUS
RS-232C: 9-pin (male)
External view
1
6
Pin No. Signal
1 DCD ; Data Carrier Detect (Input)
2 RXD ; Received Data (Input)
3 TXD ; Transmitted Data (Output)
4 DTR ; Data Terminal Ready (Output)
5 SG ; Signal Ground
6 DSR ; Data Set Ready (Input)
7 RTS ; Request to Send (Output)
8 CTS ; Clear to Send (Input)
9 NC
1-8. Signal Inputs and Outputs
5
9
1-13