Items To Prepare In Addition To Items Supplied With The Product; Touch Unit Bracket - Epson EB-1485Fi Installation Manual

Introduction
Part

Items to prepare in addition to items supplied with the product

When securing the Touch Unit with screws, prepare two commercially available M4 screws.

Touch Unit Bracket

Use this when attaching the Touch Unit to outside of the projection surface.
Part
Items to prepare in addition to items supplied with the product
Use commercially available anchor bolts or screws to secure the Touch Unit Bracket to the wall.
 M4 anchor bolts (x4)
 3.8 mm diameter wood screws with a length of 45 mm or more (x4)
Name
Infrared deflectors
(approx. 28.5 cm) x12
Spacers for screw holes x3
Label x4
Name
Touch Unit Bracket
Template sheet (for Touch
Unit Bracket)
M4 x 25mm hexagon socket
head cap bolts (x2)
Hexagon wrench (for M4)
8
Application
Use these when there is a tray or frame
at the bottom of the projection surface.
This prevents malfunctions due to laser
reflections.
Attach them to the screw hole when
securing the Touch Unit with screws.
Attach the label in the position of the
Touch Unit. These provide markers
when repositioning due to movement
that occurs during use.
Application
-
Attach this to the wall before attaching
the Touch Unit Bracket, and use it to
drill necessary holes.
Secure the Touch Unit to the Touch
Unit Bracket.
-