Expand Device; Insert Micro Sd Card/Nano Sim Card - Siemens SIMATIC IOT2050 Operating Instructions Manual

Expand device

5.1

Insert Micro SD card/Nano SIM card

Requirement
● The device is disconnected from the power supply.
● Micro SD card or Nano SIM card that is suitable for industrial use.
Installation
NOTICE
Inserting a memory card
If you are using the Micro SD card/Nano SIM card in a device installed in a system, you
must observe the safety regulations for work on electrical systems.
Carefully insert the Micro SD card/Nano SIM card into the card holder without applying
excess force.
1. Open the card cover on the bottom.
2. Push the Micro SD card/Nano SIM card
correctly into the supporting frame. The
contacts of the Micro SD card/Nano
SIM card must point in the direction of
the motherboard.
3. Push the card cover back.
SIMATIC IOT2050
Operating Instructions, 03/2020, A5E39456816-AA
5
29