Table of Contents
Advertisement
4.
Mount Distance is the distance between the camera and the target area. Set based on your own
camera setup.
5.
Leave other options at their default values.
6.
Refer to the User Manual for more detailed information on each configuration setting.
Click Apply to save settings.
7.
Alarm Configuration
Navigate to Parameter Configure > Face Alarm Linkage. Here you can configure input and
1.
output chanels as well as settings for the face detection alarm. Be sure to choose an output channel.
2.
Set the Alarm Temperature which defines what body temperature and above will set off the alarm.
Navigate to Alarm > I/O Alarm Linkage. Here you can configure your output channel and settings
3.
for the I/O alarm. Be sure to choose an output channel.
Set Trigger Mode to Connect.
4.
DCS-9500T Quick Installation Guide
9
Advertisement
Table of Contents
