Troubleshooting - Hitachi BD-D80CVE Instruction Manual

Maintenances

Troubleshooting

If the appliance does not work or it stops during operation.
First try to find a solution to the problem, if not, contact the service centre.
Description
Washing machine
cannot start up
Door can't be
opened
Water leakage
Detergent residues
in the box
Indicator or display
does not light
Abnormal noise
Error Codes
Description
●
After the check, activate the appliance. If the problem occurs or the display
shows other alarm codes again, contact the service centre.
Reason
Door is not closed properly
Washer's safety protection
design is working
The connection between inlet
pipe or outlet hose is not tight
Detergent is dampened
or agglomerated
Disconnect the power
PC board or harness has
connection problem
Reason
Door is not closed properly
Water injecting problem
while washing
Overtime water draining
Water overflow
This is caused by a faulty
device sensor.
Others
Solution
Restart after the door is closed
Check if the clothes is stuck
Disconnect the power, restart the product
Please be noted that when the temperature
inside the drum is high, the door cannot be
opened until the temperature is lowered to
a certain level.
Check and fasten water pipes
Clean up outlet hose
Clean and wipe the detergent box
Check if the power is shut down and
the power plug is connected correctly
Check if the fixing (bolts) have been removed
Check it's installed on a solid and level floor
Solution
Restart after the door is closed
Check if the clothes is stuck
Check if the water pressure is too low
Straighten the water pipe
Check if the inlet valve filter is blocked
Check if the drain hose is blocked
Restart the washer
Please try again first, call up
service line if there are still
troubles
NOTE
26