Hitachi BD-D80CVE Instruction Manual page 29

Maintenances
● Programme setting for testing in accordance with applicable standard EN
50229:2015+Commission Directive 96/60/EC.
● When using the test programmes, wash the specified load using the maximum spin
speed.
● The actual parameters will depend on how the appliance is used, and maybe
different with the parameters in above mentioned table.
● The testing with Standard Programme (drying), the load is composed of two parts
to test alone, the energy consumption, water consumption and programme duration
are the total of the two parts.
● The household washer dryer machine is equipped with a power manager system.
The duration of the left-on mode time is less than 1 minute.
❶ The energy efficiency class is from A (highest efficiency) to D (lowest efficiency).
❷ Estimated annual energy and water consumption for a four-person household,
always using the dryer (based on 200 cycles) per year.
❸ Estimated annual energy and water consumption for a four-person household,
never using the dryer (based on 200 cycles) per year;
Water consumption per year based on 220 standard washing cycles for standard
programme at 60°C and 40°C at full and partial load. Actual water consumption
will depend on how the appliance is used.
❹ Washing performance class.
❺ Spin-drying efficiency class from G (least efficient) to A (most efficient).
❻ The standard programme is standard washing programme. The programme is
suitable to clean normally soiled cotton laundry and they are the most efficient
programmes in terms of combined energy and water consumptions for washing
that type of cotton laundry. The actual water temperature may differ from the
declared cycle temperature.
Please choose the suitable type of detergent for the various washing temperatures
to get the best washing performance with less water and energy consumption.
NOTE
Remarks:
29