Sharp FX-J80U Operation Manual
Hide thumbs Also See for FX-J80U:

Advertisement

Available languages

Available languages

FX-J80U
"Plasmacluster" and "Device of a cluster of grapes" are
registered trademarks of Sharp Corporation in Japan,
USA and elsewhere.
The number in this technology mark indicates an
approximate number of ions supplied into air of
3
1 cm
, which is measured around the center of a
room applicable fl oor area (at 1.2 m height above the
fl oor) when the product is placed close to a wall and
operating on MED mode.
El número en esta marca de tecnología indica un
número de iones aproximado suministrado al aire de
3
1 cm
, que se mide alrededor del centro del área de
suelo aplicable de una habitación (a 1,2 m de altura
por encima del suelo) cuando el producto se coloca
cerca de una pared y funciona en modo MED.
AIR PURIFIER
OPERATION MANUAL
PURIFICADOR DE AIRE
MANUAL DE OPERACIÓN
This product earned the ENERGY STAR by meeting
strict energy effi ciency guidelines set by the US EPA.
US EPA does not endorse any manufacturer claims of
healthier indoor air from the use of this product.
The energy effi ciency of this ENERGY STAR qualifi ed
model is measured based on a ratio between the
model's CADR for Dust and the electrical energy it
consumes, or CADR/Watt.
Este producto obtuvo la distinción ENERGY
STAR cumpliendo directrices estrictas de efi cacia
establecidas por US EPA. US EPA no respalda las
reclamaciones de ningún fabricante sobre el aire
interior más sano del uso de este producto.
La efi ciencia energética de este modelo cualifi cado
ENERGY STAR está medido basado en proporción
entre el CADR para polvo del modelo y la energía que
consume, o CADR/vatio.

Advertisement

Table of Contents
loading

Summary of Contents for Sharp FX-J80U

  • Page 1 “Plasmacluster” and “Device of a cluster of grapes” are This product earned the ENERGY STAR by meeting strict energy effi ciency guidelines set by the US EPA. registered trademarks of Sharp Corporation in Japan, US EPA does not endorse any manufacturer claims of USA and elsewhere.
  • Page 2 Plasmacluster By emitting a balance of positive and negative ions, Plasmacluster air treatment is a natural process. SHARP AIR PURIFIER APP FEATURES • Propose optimal mode based on current condition of the room. • Confirm that condition of air quality of the room and the air has become clean visually.
  • Page 3: Table Of Contents

    Thank you for purchasing this SHARP Air Purifier. Please read this manual carefully before using the product. This manual should be kept in a safe place for future reference. CONTENTS FOR CUSTOMER ASSISTANCE ........EN-2 CONSUMER LIMITED WARRANTY ........ EN-3 IMPORTANT SAFETY INSTRUCTIONS ......
  • Page 4: For Customer Assistance

     Convenience: If you ever need warranty support, your product information is already on fi le.  Communication: Stay up to date with important notifi cations and special offers from SHARP.  Support: Quickly access support content including Owners Manuals, FAQ’s, How-to Videos, and much more.
  • Page 5: Consumer Limited Warranty

    Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.
  • Page 6: Important Safety Instructions 1

    Sharp authorized 10. Do not operate the product in a room Service Center in order to avoid a with flammable gas, such as oily hazard.
  • Page 7 IMPORTANT SAFETY INSTRUCTIONS 2 installation. This equipment generates, 7. The dust collecting ability of the product uses and can radiate radio frequency is effective even when the product is energy and, if not installed and used in as close to 1.2 inches (3 cm) from the accordance with the instructions, may wall, but the surrounding walls or floor cause harmful interference to radio...
  • Page 8 IMPORTANT SAFETY INSTRUCTIONS 3 CAUTIONS CONCERNING MAINTENANCE 1. Follow the instructions in this manual for maintenance. (Page 13 - 15) 2. Clean the exterior with a soft cloth only. 3. Do not use volatile fluids and/or detergents. The main unit surface may be damaged or cracked with strong corrosive cleansers, benzine, paint thinner, polishing powder or grease.
  • Page 9: Part Names 1

    PART NAMES 1 Operation Panel Air Outlet (Front / Back) Air Quality Monitor (FRONT) Front Display Main Unit Handle (2 locations: Left and Right) Front Louver Back Panel (Pre-Filter) Air Inlet Active Carbon Deodorizing Filter True HEPA Filter Sensor Filter Sensor (Internal) Odor / Sensitive dust / Temperature / Humidity...
  • Page 10 Humidity 20% to 90% is displayed. Blue Clean Impure Wi-Fi Indicator ( or less or more • Temperature Monitor SHARP CLOUD Indicator ( Temperature 32 F to 122 F is displayed. PM2.5 Monitor Indicates the sensitive dust sensor detects microscopic or less or more dust.
  • Page 11: Filter Installation

    FILTER INSTALLATION • To maintain the quality of the filter, it is installed in the main unit and packaged in a plastic bag. • Be sure to stop operation and unplug the product before filter installation or replacement. 1. Remove the back panel. 4.
  • Page 12: Operation 1

    OPERATION 1 OPERATION 1 PLASMACLUSTER ION START/STOP SPOT MODE START STOP Use this mode when you want to remove adhering ♪ ♪ ♪ ♪ ♪ ♪ ♪ ♪ odor, germs, and other substances from clothes, sofas and curtains. ♪ NOTE •...
  • Page 13 OPERATION 2 ON TIMER SELECTING DISPLAY Set the ON TIMER when you would like to schedule (with the product ON) the air purifier to turn on after a certain number of hours. ♪ ♪ (with the product OFF) Front Display PM2.5 level ♪...
  • Page 14 OPERATION 3 HOW TO CHANGE VARIOUS SETTINGS You can change the functions listed in the table below. 1. Turn the product OFF. 3. Select “Function Number”. GO BACK GO FORWARD ♪ ♪ ♪ ♪ ♪ ♪ ♪ ・・・・ See below table for 2.
  • Page 15: Care And Maintenance 1

    CARE AND MAINTENANCE 1 • To maintain optimum performance of this air purifi er, please clean the product including the fi lter periodically. • Be sure to stop operation and unplug the product before any maintenance or replacing accessories. MAIN UNIT / BACK PANEL When the filter maintenance indicator light turns on.
  • Page 16 CARE AND MAINTENANCE 2 TRUE HEPA FILTER / ACTIVE CARBON DEODORIZING FILTER REPLACEMENT AND MAINTENANCE CYCLE Filter Name Maintenance Cycle Max Service Life Replacement Filter Model True HEPA Filter FZ-J80HFU Whenever dust accumulates, when 1, 2 odor emanates from the air outlet, or 2 years* Active Carbon once a month.
  • Page 17 CARE AND MAINTENANCE 3 PLASMACLUSTER ION GENERATING UNIT ( electrode section ) MAINTENANCE 1. Remove the unit cover, 2. Remove dusts from the 3. Insert the unit holder and pull out the unit electrode section. in the main unit, and holder.
  • Page 18: Troubleshooting

    TROUBLESHOOTING Before calling for service, please review the list below, since the problem may not be the product malfunction. Odor and smoke persists. The filter maintenance indicator light is on. • Check the filters. If they appear to be extremely dirty, clean or replace them.
  • Page 19: Specifications

    ERROR DISPLAY • The communication between • Is the Plasmacluster ion generating SHARP server and the air purifier is unit inserted properly? ⇒ Pull out the Plasmacluster ion not available. Please check the Wi-Fi Connect generating unit and insert it to the Flash quickly Guide for details.
  • Page 20: Other Settings 1

    OTHER SETTINGS 1 At the following places, it is likely electrical wave Please refer to the Wi-Fi Connect Guide cannot reach or is disconnected: Inside of the for how to connect and pair your smart building made with concrete, reinforcing steel or device to your product.
  • Page 21 OTHER SETTINGS 2 HOW TO CHANGE VARIOUS SETTINGS 1 You can change the functions in the table below. Wi-Fi adapter ON/OFF Follow Steps 1 - 4 to select the Function. Step 1. Turn the ♪ ♪ ♪ ♪ ♪ 1. Select by following Steps 1 - 4.
  • Page 22 OTHER SETTINGS 3 HOW TO CHANGE VARIOUS SETTINGS 2 Link settings with a Update smartphone 1. Start the App then tap “ ” at the 1. Select by following Steps 1 - 4 “Home” screen and select “Update”. on page 19. 2.
  • Page 23 OTHER SETTINGS 4 HOW TO CHANGE VARIOUS SETTINGS 3 Display Wi-Fi network AP (Access Point) mode status 1. Select by following Steps 1 - 4 1. Select by following Steps 1 - 4 on page 19. on page 19. 2. Perform Wi-Fi connection of the air 2.
  • Page 24: Intellectual Property Rights For This Product 1

    Intellectual property rights for this product 1 Intellectual property rights for this product ■ Software structure ●Iw-IP Software installed in this product is structured with multiple independent Copyright (c) 2001, 2002 Swedish Institute of Computer Science. software components, each of them has our or third-party's copyright. All rights reserved.
  • Page 25 Intellectual property rights for this product 2 Copyright (c) 1994-2009 Red Hat, Inc. All rights reserved. in Japan, toll free. The direct dial number is 512-462-4118. This copyrighted material is made available to anyone wishing to use, modify, Advanced Micro Devices, Inc. copy, or redistribute it subject to the terms and conditions of the BSD License.
  • Page 26 Intellectual property rights for this product 3 Intellectual property rights for this product DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF Redistribution and use in source and binary forms, with or without modification, SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; are permitted provided that the following conditions are met: OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 1.
  • Page 27 Intellectual property rights for this product 4 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT LOSS OF USE, DATA, OR PROFITS;...
  • Page 28 Al emitir un equilibrio de iones positivos y negativos, el tratamiento con aire Plasmacluster es un proceso natural. CARACTERÍSTICAS DE LA APLICACIÓN DE PURIFICADOR DE AIRE SHARP • Proponga el modo óptimo basándose en el estado actual de la habitación.
  • Page 29 Gracias por comprar este Purificador de aire SHARP. Lea este manual detenidamente antes de utilizar el producto. Este manual debe guardarse en un lugar seguro para consultarlo en el futuro. CONTENIDO INSTRUCCIONES DE SEGURIDAD IMPORTANTES ..ES-2 NOMBRE DE LAS PARTES ..........ES-5 INSTALACIÓN DEL FILTRO ..........
  • Page 30 8. El producto tiene un enchufe polarizado el fabricante, su agente de servicio, (una espiga es más ancha que la centro de servicio autorizado Sharp otra). Para reducir el riesgo de choque o una persona calificada para evitar eléctrico, este enchufe solo encaja peligros.
  • Page 31 INSTRUCCIONES DE SEGURIDAD IMPORTANTES 2 11. No exponga el producto a la lluvia, o 2. Evite lugares donde el sensor esté lo utilice cerca del agua, en un baño, expuesto a la corriente directa de la lavandería u otra ubicación mojada. brisa o el proyecto.
  • Page 32 INSTRUCCIONES DE SEGURIDAD IMPORTANTES 3 4. No lave ni reutilice el filtro True HEPA y el filtro desodorizante de carbón activo. Lavarlo no mejorará el rendimiento del filtro y también puede provocar choque eléctrico o mal funcionamiento. 5. No opere el producto en una habitación donde haya insecticidas en aerosol.
  • Page 33 NOMBRE DE LAS PARTES 1 Panel de operación Salida de aire (Frontal / Posterior) (PARTE FRONTAL) Monitor de calidad de aire Pantalla frontal Unidad principal Manija (2 ubicaciones: izquierda y derecha) Rejilla frontal Panel posterior (Pre-filtro) Toma de aire Filtro desodorizante de carbón activo Filtro True HEPA Filtro de sensor...
  • Page 34 Limpio Impuro o menos o más Indicador Wi-Fi ( ) • Monitor de temperatura Indicador SHARP CLOUD ( ) Se muestra Temperatura 32 F a 122 Monitor PM2.5 o menos o más Indica que el sensor de polvo sensible detecta polvo microscópico.
  • Page 35 INSTALACIÓN DEL FILTRO • Para mantener la calidad de los filtros, estos están instalados en la unidad principal y empacados en bolsas plásticas. • Asegúrese de detener la operación y desenchufar el producto antes de instalación o reemplazo el filtro. 1.
  • Page 36 OPERACIÓN 1 OPERACIÓN 1 INICIAR/DETENER MODO SPOT IÓN PLASMACLUSTER INICIAR DETENER ♪ Utilicee este modo cuando desee eliminar el olor ♪ ♪ ♪ ♪ ♪ ♪ ♪ adherido, los gérmenes y otras sustancias de la ropa, los sofás y las cortinas. ♪...
  • Page 37 OPERACIÓN 2 TEMPORIZADOR DE SELECCIONAR ENCENDIDO PANTALLA Configure el TEMPORIZADOR DE ENCENDIDO (con el producto ENCENDIDO) cuando desee programar el encendido del purificador de aire después de un determinado ♪ ♪ número de horas. (con el producto APAGADO) Nivel PM2.5 ♪...
  • Page 38 OPERACIÓN 3 CÓMO CAMBIAR VARIOS AJUSTES Puede cambiar las funciones listadas en las tabla a continuación. 1. Poner el producto en 3. Seleccionar “Número de función”. APAGADO. IR ATRÁS IR ADELANTE ♪ ♪ ♪ ♪ ♪ ♪ ♪ ・・・・ Ver las funciones en la tabla a continuación.
  • Page 39 CUIDADO Y MANTENIMIENTO 1 • Para mantener el rendimiento óptimo de este purifi cador de aire, limpie el producto incluyendo el purifi cador periódicamente. • Antes de cualquier mantenimiento o sustituir accesorios, asegúrese de dejar de operar o desconectar el producto. UNIDAD PRINCIPAL / Cuando la luz del indicador del filtro de PANEL POSTERIOR...
  • Page 40 CUIDADO Y MANTENIMIENTO 2 FILTRO TRUE HEPA / FILTRO DESODORIZANTE DE CARBÓN ACTIVO REEMPLAZO Y CICLO DE MANTENIMIENTO Aproximadamente ciclo de Máxima vida del Modelo para reemplazar Nombre del filtro mantenimiento filtro Filtro True HEPA FZ-J80HFU Cada vez que se acumule el polvo, 1, 2 cuando el mal olor se libera de la salida 2 años*...
  • Page 41 CUIDADO Y MANTENIMIENTO 3 UNIDAD GENERADORA DE IÓN PLASMACLUSTER ( sección de electrodo ) MANTENIMIENTO 1. Retire la cubierta de la 2. Retire polvos de la sección 3. Introduzca el soporte de unidad, y extraiga el de electrodo. la unidad en la unidad soporte de la unidad.
  • Page 42 EN ESTA SITUACIÓN Antes de llamar a mantenimiento, por favor revise la lista a continuación, ya que el problema puede no ser un mal funcionamiento de la unidad. El olor y el humo persisten. La luz indicadora de mantenimiento del filtro está •...
  • Page 43 PANTALLA DE ERROR • La comunicación entre el servidor • ¿Se ha introducido correctamente SHARP y el purificador de aire no la unidad generadora de iones está disponible. Plasmacluster? Consulte la Guía de conexión Wi-Fi ⇒ Saque la unidad generadora para obtener más información.
  • Page 44 OTROS AJUSTES 1 Dentro del edificio hecho de hormigón, acero reforzado Consulte la Guía de conexión Wi-Fi o metal / cerca de la obstrucción / cerca del dispositivo para saber cómo conectar y vincular su de comunicaciones inalámbricas que aplica la misma dispositivo inteligente con su producto.
  • Page 45 OTROS AJUSTES 2 CÓMO CAMBIAR VARIOS AJUSTES 1 Adaptador Wi-Fi Puede cambiar las funciones en la tabla a continuación. Siga los pasos del 1 al 4 para seleccionar la función. ENCENDIDO / APAGADO Paso 1. Ponga el producto ♪ ♪ ♪ ♪ ♪ 1.
  • Page 46 OTROS AJUSTES 3 CÓMO CAMBIAR VARIOS AJUSTES 2 Vincular ajustes con un Actualizar teléfono inteligente 1. Inicie la aplicación y luego pulse 1. Seleccione siguiendo los pasos “ ” en la pantalla “Home” y 1 - 4 en la página 17. seleccione “Update”.
  • Page 47 OTROS AJUSTES 4 CÓMO CAMBIAR VARIOS AJUSTES 3 Visualizar estado de red Modo PA (punto de Wi-Fi acceso) 1. Seleccione siguiendo los pasos 1. Seleccione siguiendo los pasos 1 - 4 en la página 17. 1 - 4 en la página 17. 2.
  • Page 48 Fecha de comienzo de uso Replace the filters when they are no longer removing odor or dust. Reemplace el filtro cuando éste remueva olor o polvo. SHARP ELECTRONICS CORPORATION 100 Paragon Drive, Montvale, NJ 07645, U.S.A. Printed in Thailand Impreso en Tailandia...

Table of Contents