Hard-Drive And Optical-Drive Module; Removing The Hard-Disk Drive And Optical-Disk Drive Module - Dell Precision 3440 Small Form Factor Service Manual

Steps
1. Insert the hard-disk drive assembly into the slot on the system and slide the hard-disk drive assembly down.
2. Press down the hard-disk drive assembly, until it clicks into place.
3. Connect the power cable and hard-disk drive cable to the connectors on the hard-disk drive.
Next steps
1. Install the front bezel.
2. Install the side cover.
3. Follow the procedure in

Hard-drive and optical-drive module

Removing the hard-disk drive and optical-disk drive
module
Prerequisites
1. Follow the procedure in
2. Remove the Side cover
3. Remove the Front bezel
20 Disassembly and reassembly
after working inside your computer.
Before working inside your computer.