System And Setup Password; Assigning A System Setup Password - Dell Precision 3440 Small Form Factor Service Manual

Steps
1. Download the BIOS update .EXE file to another system.
2. Copy the file e.g. O9010A12.EXE onto the bootable USB flash drive.
3. Insert the USB flash drive into the system that requires the BIOS update.
4. Restart the system and press F12 when the Dell splash logo appears to display the One Time Boot Menu.
5. Using arrow keys, select USB Storage Device and click Enter.
6. The system will boot to a Diag C:\> prompt.
7. Run the file by typing the full filename, for example, O9010A12.exe and press Enter.
8. The BIOS Update Utility will load. Follow the instructions on screen.
Figure 1. DOS BIOS Update Screen

System and setup password

Table 4. System and setup password
Password type
System password
Setup password
You can create a system password and a setup password to secure your computer.
CAUTION: The password features provide a basic level of security for the data on your computer.
CAUTION: Anyone can access the data stored on your computer if it is not locked and left unattended.
NOTE: System and setup password feature is disabled.

Assigning a system setup password

Prerequisites
You can assign a new System or Admin Password only when the status is in Not Set.
66 System setup
Description
Password that you must enter to log on to your system.
Password that you must enter to access and make changes to the
BIOS settings of your computer.