Local Soft Key Area; To Start Call Screen; To Close Call Screen Automatically; Screen When The Phone Starts - NEC DT930 Series User Manual

1.

Local Soft Key Area

The soft keys provided by the terminal are displayed in
this area. It is possible to go to the Favorite screen,
Phone book screen and History screen (same
operation as the Favorite screen).
About Local soft key 2 (Phone book screen), if
this feature is not available by initial settings, the
icon is not displayed. For details, contact the
administrator.

To Start Call Screen

Use the following procedure for displaying the Call
screen.
When a screen other than the Call screen / Line screen
is displayed and the Call screen is activated with a
display method with a circle in the auto end column in
the table below, the system is automatically set by on-
hooking or abandoning the call. Exit the screen and
return to the original screen. For details, see
Call Screen Automatically.
Operations
When pressing local soft key that is assigned
call screen icon.
When there is an incoming call to the terminal
(without assigning to the line key).
When you lift the handset.
When the terminal receives instructions from
XML application server.
When a pop-up button on the XML application
is pressed.
When the terminal receives instructions from a
system.

To Close Call Screen Automatically

If the system screen is displayed in a way that is subject
to automatic termination, placing the handset on-hook
or abandoning the call will return you to the screen
before the call started.
However, automatic termination does not occur in the
following cases.
When a menu button is pressed and the XML application
is selected by the application change screen during a call
screen.
When the terminal receives instructions from an XML
application server.
When a soft key other than soft key 3 is pressed, while the
system screen is displayed to switch to another screen.

Screen When the Phone Starts

The screen displayed at phone startup or when the
To Close
Home key is pressed depends on settings. This section
explains the settings related to the screen display.
Auto

To Set the Home Screen

Close
The following explains how to set a screen that will be
displayed when the phone has started up or the Home
key is pressed.
(1) Display the Menu screen, select Settings.
(2) Select
(3) Select
(4) Select
(5) Select
86
Does Not Close Automatically
1
User Settings.
3
Display.
7
Portal Mode Settings.
4
Home Screen Setting.