Make A Call From Directory; To Set Prefix - NEC DT930 Series User Manual

1.

Make a Call from Directory

Note: While the Directory screen is being displayed, you
cannot make a call by dialing a telephone number.
(1) Press the
When the menu screen is displayed. Select
Directory then press
(or press the 2 key)
Or, press the following softkeys in the order listed:
↓ ↑ TELBK
Prog
2
: Search then press
(2) Select
2
press key.
1: REGIST
3: SETTING
1: 2:
Note: The display will show No TELBK Data if there
are no entries to review.
TLBK1: SEARCH NAME
NUM
(3) Select a search method (e.g., NAME, GRP, NUM
or MEM).
[SEARCH MENU]
NAME GRP
The following display is an example of dial
by name.
key.
(Enter) or OK softkey
).
(Enter) or
2: SEARCH
4: DeleteAll
3: 4:
[A]
<
MENU
MEM
NUM
[1] NEC
2142622000
CHG
(4) Lift the Handset, press the
key or press the Dial softkey while displaying the
detailed data for target party on LCD.
Note: If multiple telephone numbers are assigned
into a target party, a call is made to the first telephone
number.

To Set Prefix

When making a call, a prefix can be added to telephone
numbers to be dialed. Prefixes need to be set in
advance.
(1) Press the
displayed.
(2) Select Settings.
1
User Settings then press
(3) Select
(Right-cursor) or press
2
Talk then press
(4) Select
(Right-cursor) or press
5
Prefix then press
(5) Select
(Right-cursor) or press
1
Prefix then press
(6) Select
(Right-cursor) or press
(7) Enter a prefix using the digit keys. After entering
the prefix press
139
Dial
DEL
Speaker key or MIC
key. The menu screen is
(Enter),
1
key.
(Enter),
2
key.
(Enter),
5
key.
(Enter),
1
key.
(Enter).