Checking The Ip Address Of The Scansnap (Ix1500) - Fujitsu ScanSnap iX1500 Basic Operation Manual

Checking the IP address of the ScanSnap (iX1500)

Check the IP address of the ScanSnap on the touch panel.
1.
Click the ScanSnap Manager icon
[control] key on the keyboard, and select [Quit] from the
Menu" (page
a ScanSnap Manager exits.
2.
Press on the
screen.
3.
Press
4.
Check that the name of a network which is currently connected, is displayed
in [Access point connection]
If [Access point connection] is disabled or if a network name is not displayed, refer to
"Connecting the ScanSnap to a Computer in Access Point Connect Mode (iX1500)" (page 118)
and connect the ScanSnap to a wireless access point.
5.
Press [Wi-Fi information] to display the [ScanSnap information] screen.
6.
Check the [IP address] in the [Network] tab.
84).
touch panel
to display the [Wi-Fi settings] screen.
Registering a Certificate/ Checking the Wireless LAN Settings (iX1500)
in the Dock while holding down the
of the ScanSnap to display the [Settings]
146
"ScanSnap Manager