Startup Mode (Ix1500) - Fujitsu ScanSnap iX1500 Basic Operation Manual

Startup Mode (iX1500)

The action that the ScanSnap takes when the ADF paper chute (cover) is opened and the ScanSnap
is turned on depends on the start up mode setting of the ScanSnap.
The ScanSnap has two startup modes as described below.
l Fast
You can start scanning immediately. The ScanSnap enters sleep mode (standby mode) when
the ADF paper chute (cover) is closed.
l Normal
The ScanSnap is turned on. The ScanSnap is turned off when the ADF paper chute (cover) is
closed.
The procedure to change the setting for the startup mode of the ScanSnap is as follows:
1.
Click the ScanSnap Manager icon
[control] key on the keyboard, and select [Quit] from the
Menu" (page
a ScanSnap Manager exits.
2.
Press on the
screen.
3.
Press
4.
Press [Startup mode] to display the [Startup mode] screen.
5.
Change the setting.
6.
Press to return to the home screen.
84).
touch panel
to display the [Scanner settings] screen.
in the Dock while holding down the
of the ScanSnap to display the [Settings]
94
Turning the ScanSnap On or Off
"ScanSnap Manager