Yamaha MTX Series Setup Manual page 59

8.
When you see the dialog box "Display the configuration diagram? The diagram can also
be printed." click [Yes].
A cabling diagram will appear. If you want, click [Print] to print the diagram.
To close the screen, click [Close].
NOTE
If you want to view the cabling diagram again, do so by choosing [File] menu → [Print Configuration Diagram].
If you want to use the Device Configuration Wizard to change the device configuration, click the [Device Config] but-
ton in the Project screen.
Example 3) Using cascade mode to add MTX input channels (analog connection)
59
MTX Setup Manual