Optional Interfaces - Bosch Rexroth IPC 40.2 Project Planning Manual

7-14
Connections

Optional Interfaces

Depending on the variant the IPC 40.2 provides a GIGABIT, a GIGABIT3
or a GIGASTAR interface.
GIGABIT Interface
As display a BF 312T or BF 315T can be connected to the GIGABIT
interface. As accessories ready-made cables are provided (see page 10-
3). Using the GIGABIT3 interface two cables are necessary. The first is
connected to the 15-pin RJ45 female connector X29 and the second to
the 15-pin D-Sub female connector X31.
GIGABIT3 Interface
The GIGABIT3 interface is assigned to the 25-pin D-Sub female
connector X71. To this female connector you connect via a ready-made
cable available as accessory (see page 10-3) a display BTT 16.1 or
BTT 40.1.
GIGASTAR Interface
The GIGASTAR interface is assigned to the 25-pin D-Sub female
connector X71. To this female connector you connect via a ready-made
cable available as accessory (see page 10-3) a display VDP 16.1,
VDP 40.1 or VDP 60.1.
IPC 40.2
DOK-SUPPL*-IPC*40.2***-PR02-EN-P