Toro TX 427 Operator's Manual page 25

1. Front screen
6. Remove the shoulder bolts and nuts securing
the oil cooler to the top of the front screen
(Figure 29).
1. Nut
2. Oil cooler
7. Remove the front screen.
8. When finished, install the front screen with the 4
bolts removed previously.
9. Install the oil cooler to the front screen with the 4
shoulder bolts and nuts removed previously.
10. Slide the sloped plate between the frame and
the weights; secure it to the front screen grill
using the carriage bolts and nuts removed
previously (Figure
Figure 28
2. Bolts (left side bolt not
shown)
Figure 29
3. Front screen
4. Shoulder bolts
27).
11. Tighten the bolts securing the front weights
(Figure 27).
12. Install the side screens and close the hood.
g004188
g004189
25