Cleaning
Do not stop operation by unplugging the power plug.
Otherwise, it may cause fi re, electric shock or unit failure.
Do not splash water on the unit. Doing so may cause a unit failure.
Do not use volatile solvents, such as gasoline, thinner, benzene, wax, kerosene, alcohol, etc. or polishing powder, or deter-
gent (used for kitchen or laundry). Such chemicals could cause deformation, discoloration, damage or removal of print labels.
When using a chemically treated cloth, follow safety instructions.
Do not use a dryer or heater to dry the unit. Heating could cause deformation, discoloration, damage or removal of print labels.
Lay a soft cloth or similar material beneath and around the purifi er body to protect the fl oor against scratches
and from getting wet.
Do not tilt or tip over the unit.
Pre-fi lter
(Cleaning guideline: When the pre-fi lter indicator fl ashes, or about once a month)
1
Check if the operation has stopped before removing the power plug from the socket
While operating, touch the
2
Open the front panel.
3
Remove the pre-filter from the front panel.
The pre-filter is hooked onto the front panel.
Hold the upper-center part of the pre-filter and
pull in the direction of the arrow to remove it.
Pre-filter
Front panel
Cleaning
4
Remove dust using a vacuum cleaner.
Lightly clean using the nozzle brush of the vacuum cleaner
and vacuum the dust.
Remove dirt by washing with water.
If it is extremely dirty, wash it with water and a soft sponge
without using excessive force. Drain well and let it dry in a
well-ventilated area away from direct sunlight.
CAUTION
Do not use detergent (kitchen or laundry use) for cleaning.
E-26
EP-PF120J_EN.indd 26
EP-PF120J_EN.indd 26
WARNING
CAUTION
power button and stop operation.
(P.E-14)
Nozzle brush
Pre-filter
Note: Clean the back face as well.
2/11/2019 3:36:28 PM
2/11/2019 3:36:28 PM