Panasonic AJ-CVF25GJ Operating Instructions Manual page 17

Parts and their functions
7 TALLY switch
Adjusts the brightness of the front tally lamp.
HIGH : Makes the front tally lamp brighter.
OFF : Turns the front tally lamp off.
LOW : Makes the front tally lamp dimmer.
8 Microphone holder
Enables an optional microphone to be attached. (Page 27)
9 Front tally lamp
Lights when the camera is shooting and the TALLY switch is set to HIGH or LOW.
Also, blinks while a warning is given.
The brightness of the front tally lamp is controlled by the setting of the TALLY switch (HIGH or LOW).
 Connecting cable
Connected to the VF connector on the camera.
 Slide stopper
Prevents the viewfinder from becoming detached from the camera when it is attached and slid to the
left or right.
 Slide rail
Slide rail for installing to the camera unit.
 Eye cup (Accessory)
Installed on the viewfinder itself.
 Diopter adjuster ring
Adjusts the diopter when this ring is rotated so that the image is seen at its clearest.
 Eyepiece unit
 Viewfinder barrel unit
Can be flipped up or rotated depending on how the camera is to be used.
 Viewfinder barrel unit release lever
Releases the lock, causing the viewfinder barrel unit to flip up.
 Mirror
 LCD monitor
(continued)
(17)